Slip-Type "RJ" Ram-Pak Expansion Joint
Double - Flanged Ends - 150lb
The “RJ” Ram-Pak all welded Slip-Type expansion joint offers exceptional value and low maintenance.
The use of Ram Joint external packing cylinders with quarter turn shut off valves prevent blowback of the packing, allowing additional packing to be added at full line pressure. The RJ utilizes both flake graphite and graphite impregnated rope packing.Download PDF of all Drawings
Slip-Type “RJ” Ram-Pak Expansion Joint
Body is carbon steel, fabricated to close tolerances. Body can be furnished with either a flanged or welding end. Flanged ends are faced and drilled in accordance with ANSI Standards.
BASES for single joints are optional. Because single expansion joints frequently are subject to main anchor loading in piping systems, bases for single Ram-Pak Expansion Joints are designed so that with proper selection of bolting material they may be used as main anchors. Intermediate anchor bases are finished on all double joints.
SLIP of carbon steel, accurately machined and plated with chrome over nickel as standard or with hard chrome plating; minimum .002" total thickness. Plating can be certified by Permascope inspection per ASTM Standard B-499.
4. Integral Internal And External Guides
INTEGRAL INTERNAL AND EXTERNAL GUIDES are of non ferrous material to insure close tolerance guiding without scratching or scoring the highly polished carbon steel, chrome plated slip.
RAM The ram packing cylinders are carbon steel, welded in place and have internal acme thread in body and external acme thread on the ram and are design for injection of semi-plastic self-lubricating packing under full line pressure.
6. ADSCO Shut-off Valve
ADSCO SHUT-OFF VALVE ¼ turn shut-off Valve prevents blowback of packing under full line pressure.
ADSCO-R-PAK Semi-plastic, self-lubricating packing available in a variety of packing compositions to meet your system's pressure requirements.
8. Limit Stops
LIMIT STOPS, when engaging stuffing box end, prevent slip from being pulled out of body. Limit stops are of stainless steel, designed for full line pressure thrust at 1 ½ times design pressure.